---
title: "Restarting a Logger"
description: "Here's a simple guide to restarting your SUMS Logger:"
url: https://help.sums.com.au/en/articles/31-restarting-a-logger
collection: "Device troubleshooting & maintenance"
updated: 2026-07-06
language: en
---

# Restarting a Logger

Here's a simple guide to restarting your SUMS Logger:

## Step-by-Step Instructions:

### **Locate the "Magnet" Spot:**

On your SUMS Logger, you'll find a specific area marked with the word "Magnet."

### **Apply the Magnet:**

Hold a magnet firmly against the "Magnet" spot on the logger.

Ensure the magnet is in direct contact with the designated area.

Keep the magnet in place for a full 10 seconds.

### **Verify Power Off:**

Once the 10 seconds are up the lights will flash in a sequence, when the lights no longer flash, this indicates that the device has powered down.

### **Restart the Logger:**

Gently swipe the magnet across the "Magnet" spot again.

Wait a few moments for the lights to turn back on. This signifies a successful restart.
