---
title: "Adding Reads & Notes"
description: "A brief description of how to add notes and reads in the Meter Overview."
url: https://help.sums.com.au/en/articles/23-adding-reads-and-notes
collection: "Exploring SUMS+"
updated: 2025-11-13
language: en
---

# Adding Reads & Notes

A brief description of how to add notes and reads in the Meter Overview.

## **How to get there**

From the meter selection menu in the right-hand column, click on the arrow icon of the meter you are uploading photos & information for.

![](https://staticfiles.gleap.io/ghelparticle/HFZLDQYsnnklz43X2E97Pj5s07jSvhcN1J1EHVAAeto1oIHqg6wBQbepY5f3kP3PAaPXmCDnt7M.png)

## **Meter Readings**

The meter readings tab is where you can add any manual meter readings & relevant images. These reads are used to validate that the logger is functioning as expected.

When adding a meter read, it is key that the timestamp is matched exactly with the time the read was taken.

1.  Select the **Reads** tab at the top of the page.  
    
    ![](https://staticfiles.gleap.io/gattachments/FdcBss3UPejbZDNO55JTL9ZcmenUka9Hqn9vZ69qZxgQmxm1Wpi4OAQSX2uENMYT9DzEv5uDHmo.png)
    
2.  Click on the **Add New Reads** button at the top right of the table.  
    
    ![](https://staticfiles.gleap.io/gattachments/992GZZZv86bhqbQsgD152iWUSBC5eklYoei3ikEQsblKnK9xq6yfdTuRqatdTCOfmBAzcgOgtAG.png)
    
3.  Enter data into the available fields, most importantly ensure the timestamp is accurate to the time that the photo of the meter read was taken.  Please see the example below.  
    
    ![](https://staticfiles.gleap.io/gattachments/0pgXRypTBUhCKHeiTSbyULcDHEljHTl0EnjLJPxxn1DZOkTYIamlnpz2bAb5v2kQyKxxDemmglg.png)
    
4.  Click the **Add Reading** button to save the entry.
    

## **Adding Meter Notes**

The Meter Notes section is where you can include any notes & images on the logger installation, maintenance, or other meter-related notes that should be documented.

1.  Select the **Notes** tab at the top of the page.  
    
    ![](https://staticfiles.gleap.io/gattachments/lncFfOm9QZsvljKef9HsPztLpB4aiPfQSuhSLOwsfleMbyyZAdUHAx7z3J3DPdnXiwlu9yzjZJ5.png)
    
2.  Click on the **Add New Note** button at the top right of the table.  
    
    ![](https://staticfiles.gleap.io/gattachments/Jr58gCe9eH44oubUznhEe2GyMmx6d7J77CyiNRQosNAnRkgZutzO1NVT6I0gHJBIGqGanX1FXbF.png)
    
3.  Enter data into the available fields. It is important to upload all photos taken at the time of installation and to include in the note a description of the meter location. Please see the example below.  
    
    ![](https://staticfiles.gleap.io/gattachments/DcOYNw8RfPypur6ZFLZdo6sR4SIXt0NdGzgJEPqdBTiIc2gk01pj7mBonfgPq436MR3iiB6lZTv.png)
    
4.  Click the **Add Note** button to save the entry.
