---
title: "Identifying your water meter"
description: "To ensure an efficient logger installation, it is important that your water meter brand and type is identified prior to installation."
url: https://help.sums.com.au/en/articles/11-identifying-your-water-meter
collection: "Device installation & setup"
updated: 2026-03-18
language: en
---

# Identifying your water meter

To ensure an efficient logger installation, it is important that your water meter brand and type is identified prior to installation.

A SUMS representative has contacted you and requested further meter information so that the logger installation can be completed efficiently.

Please provide them with the following:

## **Close-up photo of the meter**

So that the type of water meter can be determined, ensure that any labelling and the meter dial can be seen (please include any serial numbers).

![](https://staticfiles.gleap.io/ghelparticle/VZbBoSuPUPTcLvNsXO83fDQ9ZR2OZRD9tKmjNHvkdhdNEOEE9UPAJ7c8QBVnNUNprHceklehrKN.jpg)

## **Meter location photo**

This photo will help determine the exact location of the meter. Please take this from some distance back so that the location can be more easily determined.

![](https://staticfiles.gleap.io/ghelparticle/xj5lNJ6ZtAq0oY3v6mwu3CUk5cCgW7dkZ6SqnSSZNi5ngv7cLwDbuSE9KqPi7iKjWdRw6zkm35s.jpg)

## **Meter serial photo**

This photo will help determine the meter identification number. Please ensure all letters and numbers are included in the photo.

![](https://staticfiles.gleap.io/ghelparticle/R9EKcYuMDvox7u11by5AYQCy1SiEzLleCI6ICW6t1ca4b9bLSjzsFJvwPvvPPgdWJIdFXPGQQ77.jpg)

## **Meter pipe-work photo**

This photo will help identify any other logging devices attached or installation issues. If another logging device is connected, please ensure you take close-up photos of the logger so that it can be identified.

![](https://staticfiles.gleap.io/ghelparticle/0Vl5cyKPrANXZ4dUxM4yP5pnI6IuDnivOHle2C6myRqI7CdGyUyWLjRVq7jQtjsCM0AIhkT1lqy.png)

## Other important information you may want to inform SUMS of:

-   Written location information e.g. "_Meter located on 123 Sydney Rd, to the right of driveway entrance below the company sign"._
    
-   Any site induction requirements that will need to be completed prior to the installation.
